Roscolux color filters, affixed in holders or color frames in front of the lens, change the color of light in
architectural or theatrical fixtures. It is manufactured using a unique technology to insure the longest possible life under hot theatrical lights. Roscolux is comprised of two types of plastic. More than 65% of the line is made from co-extruded polycarbonate plastic. The remainder of the line is deep dyed polyester. Visit http://www.rosco.com/us/filters/roscolux.asp for color information.
See Product Drop Down List for selection by number/name. Sheets are 20 inches X 24 inches.
Note: If you cannot find the color selection you are wanting on the drop down list, give us a call. Non-stock colors may be ordered with a ten (10) sheet minimum per color.
TIP: To prolong the life of a color filter, align your ellipsoidal lamp to a flat field focus. (Get rid of the hot spot.) You can increase the distance between the lamp and the filter by using a top hat or barn door. In extreme cases, try Rosco Heat Shield or Thermashield to prolong the life of your filters.
Never use a plastic filter directly in front of an open faced lamp. This will nearly always cause premature failure because the heat is trapped and it has nowhere to go except to the plastic filter. Always allow a suitable air gap.